How to Get Ready for Remote Data Collection at BL831
              (but NOT how to actually collect data!)


CLICK on underlined links below for more information-->>>

... Step Zero: Download NoMachine NX Client ...  

... Step One: Install NoMachine NX Client and Connect ...  
... Connect via the NX Client ONLY IF you are going to be collecting data remotely.
...... once you have convinced yourself that you can connect via NX, log off.
... Multiple sessions can connect at the same time. If you like you can create a new session for yourself.
... Note: If you open an NX session that has a user connected, they will be bumped off you'll take it over.

... Step Two: Send Your Samples to the Beamline ...  

... Step Three: How your samples will be Named and Loaded into the Robot Dewar by the BL831 staff ...  
... Remote data collection requires your samples (a maximum of 50 at a time)
...... to be loaded on to the BL831 LN2 conveyor belt BY HAND
... Your samples will be assigned a name when they are loaded on to the conveyor belt
...... click on link above for more info naming conventions and loading/unloading.

... Step Four: NX in, start BluIce, mount and shoot your crystals...