Heat both sides of top with 2 2"X9" heaters part # 5428 Kapton or Rubber, 24AWG
154, 77.7, 46.8, 21.6, 14.3, 10.6 ohms available.  Effective area 17.22"
5428 KA $35.90
     KB  39.50
     RA   22
     RB  27.50

rubber lead time, 4 weeks with adhesive


Get CT325TF2A5 controller, need Thermistor, want up to 50 watts power, unit can provide 240Watts.  Unit has 4Amp max, open drain.  I^2 R = Watts

What does this mean? Must provide resistor to limit current?  Is ouput voltage = input voltage?  If so, than say 40V supply and V^2/R= 50 Watts so want R= 1600/50=32 ohm. Right?

Bearing Support is 1.25" dia X 3" high, want ~3.875"X3"
Part #5465 is 3"X4", should be fine.
62.1,30.9, 19.4, 8.6, 5.7, 4.1 ohms
KB 35.50


5562 for goinometer
KB $31.55


Goniometer

thermistor part # TS665TFY40 (a=without, b=with stickem)
.20  X.47 X 0.079 inches
14.80

#15 epoxy 2 componet $10